{"id":8079745349,"title":"Santa Maria Wood Model Kit by Amati","handle":"santa-maria-wood-model-kit-by-amati","description":"\u003cp\u003eThe Santa Maria was a Nao, and the flagship of the Columbus fleet. It was a merchant ship, between 200-600 tons. The boat's length was 75 feet with a wide beam, 25 feet. This allowed it to carry more people and cargo. She had a deep draft, 6 feet. The vessel had three masts, a mainmast, a foremast, and a mizzenmast. Five sails altogether were attached to these masts. Each mast carried one large sail. The foresail and mainsail were square; the sail on the mizzen was a triangular sail known as a lateen mizzen. The ship had a smaller topsail on the mainmast above the mainsail and on the foremast above the foresail. In addition, the ship carried a small square sail, a spritsail, on the bowsprit. Each sail was attached to a long wooden pole, a yard, which spread the sail out across the top and held it open. The Santa Maria also had a crow's nest on the mainmast. It had a raised stern. There was a forecastle in the bow of the ship. Most of the force used to drive this ship came from the largest mainsail. The other sails were used for \"trimming.\" Though many sailors believed that the Santa Maria was a fine ship for her day, Columbus was not so impressed. He did not think it was a ship fit for discovery. Because of the deep draft, the vessel was not suited for sailing near reefs and shallow island waters. In fact, the craft ran aground off Hispaniola and had to be abandoned. Amati presents a superlative Santa Maria ship model. Kit features plank-on-bulkhead construction with pre-cut frames and keel. Fittings realistically reproduced in cast metal, brass and hardwoods. Sailcloth, rigging line, brightly colored flags and pennants are all supplied. The ship is armed with 6 machine turned brass cannon. Kit is complete with detailed plans and instructions. Intermediate Skill Level. Length 21-1\/2\" * Height 19\" * Scale 1:65 (Display Stand not included) For new or limited experience wood modelers, we strongly recommend the technique book Ship Modeling Simplified. Please note: The manufacturer of this wood kit is based in Italy. Although complete plans and instructions are included, the limited English instructions provided require critical thinking and some modification as needed. This is not a build by numbers kit, and is not for everyone. Additional technique books, and or access to the advice of an experienced wood modeler or wood model club is recommended. Model Ship building Links: Model Ship World Forum Ships of Scale Model Forum. Model Ship Builder Forum Hobby Mill USA The Lumberyard for Model Shipwrights Lauck Street Shipyard College of Model Shipbuilding Syren Ship Model Fittings \u0026amp; Supplies To see other wood model ship kits: please click here. For tools, books, \u0026amp; glue: please click here.\u003c\/p\u003e","published_at":"2017-06-04T21:19:44-07:00","created_at":"2017-06-04T21:19:44-07:00","vendor":"SEA GIFTS","type":"","tags":[],"price":17500,"price_min":17500,"price_max":17500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30804613893,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Santa Maria Wood Model Kit by Amati","public_title":null,"options":["Default Title"],"price":17500,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Title"],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Santa Maria was a Nao, and the flagship of the Columbus fleet. It was a merchant ship, between 200-600 tons. The boat's length was 75 feet with a wide beam, 25 feet. This allowed it to carry more people and cargo. She had a deep draft, 6 feet. The vessel had three masts, a mainmast, a foremast, and a mizzenmast. Five sails altogether were attached to these masts. Each mast carried one large sail. The foresail and mainsail were square; the sail on the mizzen was a triangular sail known as a lateen mizzen. The ship had a smaller topsail on the mainmast above the mainsail and on the foremast above the foresail. In addition, the ship carried a small square sail, a spritsail, on the bowsprit. Each sail was attached to a long wooden pole, a yard, which spread the sail out across the top and held it open. The Santa Maria also had a crow's nest on the mainmast. It had a raised stern. There was a forecastle in the bow of the ship. Most of the force used to drive this ship came from the largest mainsail. The other sails were used for \"trimming.\" Though many sailors believed that the Santa Maria was a fine ship for her day, Columbus was not so impressed. He did not think it was a ship fit for discovery. Because of the deep draft, the vessel was not suited for sailing near reefs and shallow island waters. In fact, the craft ran aground off Hispaniola and had to be abandoned. Amati presents a superlative Santa Maria ship model. Kit features plank-on-bulkhead construction with pre-cut frames and keel. Fittings realistically reproduced in cast metal, brass and hardwoods. Sailcloth, rigging line, brightly colored flags and pennants are all supplied. The ship is armed with 6 machine turned brass cannon. Kit is complete with detailed plans and instructions. Intermediate Skill Level. Length 21-1\/2\" * Height 19\" * Scale 1:65 (Display Stand not included) For new or limited experience wood modelers, we strongly recommend the technique book Ship Modeling Simplified. Please note: The manufacturer of this wood kit is based in Italy. Although complete plans and instructions are included, the limited English instructions provided require critical thinking and some modification as needed. This is not a build by numbers kit, and is not for everyone. Additional technique books, and or access to the advice of an experienced wood modeler or wood model club is recommended. Model Ship building Links: Model Ship World Forum Ships of Scale Model Forum. Model Ship Builder Forum Hobby Mill USA The Lumberyard for Model Shipwrights Lauck Street Shipyard College of Model Shipbuilding Syren Ship Model Fittings \u0026amp; Supplies To see other wood model ship kits: please click here. For tools, books, \u0026amp; glue: please click here.\u003c\/p\u003e"}
  1. Home
  2. Santa Maria Wood Model Kit by Amati

Santa Maria Wood Model Kit by Amati

Product Image
Product Description

The Santa Maria was a Nao, and the flagship of the Columbus fleet. It was a merchant ship, between 200-600 tons. The boat's length was 75 feet with a wide beam, 25 feet. This allowed it to carry more people and cargo. She had a deep draft, 6 feet. The vessel had three masts, a mainmast, a foremast, and a mizzenmast. Five sails altogether were attached to these masts. Each mast carried one large sail. The foresail and mainsail were square; the sail on the mizzen was a triangular sail known as a lateen mizzen. The ship had a smaller topsail on the mainmast above the mainsail and on the foremast above the foresail. In addition, the ship carried a small square sail, a spritsail, on the bowsprit. Each sail was attached to a long wooden pole, a yard, which spread the sail out across the top and held it open. The Santa Maria also had a crow's nest on the mainmast. It had a raised stern. There was a forecastle in the bow of the ship. Most of the force used to drive this ship came from the largest mainsail. The other sails were used for "trimming." Though many sailors believed that the Santa Maria was a fine ship for her day, Columbus was not so impressed. He did not think it was a ship fit for discovery. Because of the deep draft, the vessel was not suited for sailing near reefs and shallow island waters. In fact, the craft ran aground off Hispaniola and had to be abandoned. Amati presents a superlative Santa Maria ship model. Kit features plank-on-bulkhead construction with pre-cut frames and keel. Fittings realistically reproduced in cast metal, brass and hardwoods. Sailcloth, rigging line, brightly colored flags and pennants are all supplied. The ship is armed with 6 machine turned brass cannon. Kit is complete with detailed plans and instructions. Intermediate Skill Level. Length 21-1/2" * Height 19" * Scale 1:65 (Display Stand not included) For new or limited experience wood modelers, we strongly recommend the technique book Ship Modeling Simplified. Please note: The manufacturer of this wood kit is based in Italy. Although complete plans and instructions are included, the limited English instructions provided require critical thinking and some modification as needed. This is not a build by numbers kit, and is not for everyone. Additional technique books, and or access to the advice of an experienced wood modeler or wood model club is recommended. Model Ship building Links: Model Ship World Forum Ships of Scale Model Forum. Model Ship Builder Forum Hobby Mill USA The Lumberyard for Model Shipwrights Lauck Street Shipyard College of Model Shipbuilding Syren Ship Model Fittings & Supplies To see other wood model ship kits: please click here. For tools, books, & glue: please click here.

Sku:
Vendor: SEA GIFTS
$175.00
Maximum quantity available reached.

SALES and RETURN POLICY:

 

SPECIAL NOTE ON GOODS DAMAGED IN SHIPMENT:

Be sure to inspect your shipment as soon as it arrives! If the product has been damaged during shipment, you must contact us IMMEDIATELY. A replacement product will be sent to you after you notify us.

Our Sales Policy may be stated very briefly, it is to do everything possible to assure Customer satisfaction.

We hope that you are satisfied and delighted with everything you purchase from us, however if this is not the case we will authorize returns for refund or exchange within 30 days following receipt of the item by you (except for personalized items). All returns must be new, unused and contain all original product packaging and accessories. Orders over $40 are subject to a 10% restocking fee if returned for credit. Orders over $1000 are subject to a 20% restocking fee. Shipments refused without authorization from us are subject to a 20% restocking fee. If a free shipping offer is used, the original shipping charge will be deducted from the return. Shipping and handling charges are not refundable. Returns must be made in original condition and in the item's original packaging, double boxed, and appropriately insured. Items that have been assembled, painted or altered in any way from the original condition cannot be accepted as a return. Additionally, if the product box has been damaged, or altered in any manner, we will also refuse to accept this as a valid return.

So that we can supervise proper handling of exchanges or credits, we must be aware of the return before it is sent back. Returned items must be received by us within 2 weeks of our Return Merchandise Authorization. For your protection, please use a "traceable" and insured shipping method like UPS ground.

IMPORTANT: Please E-mail us for a Return Merchandise Authorization (RMA #).
Please clearly mark your RMA # on the outside of your package. Packages received without the RMA # clearly marked may be refused or returned.


E-mail: sales@seagifts.com



 

LIMITS OF RESPONSIBILITY - RC MODELS:

We accept no responsibility for damage and/or loss incurred during operation of a radio-controlled model. In most cases it is very difficult or impossible to determine whether the damage was actually due to radio equipment failure or to operator error. Replacement parts are available direct from the manufacturer. If the item you wish to return is inoperable, but has no apparent damage, it is considered defective. Used, defective merchandise should be returned directly to the manufacturer for warranty repair or replacement. If you need help in contacting the manufacturer, please e-mail us at sales@seagifts.com.