Free Shipping over $150
20% Off Sale!
Please Enter this Coupon Code at checkout- Sale20
{"id":8079823301,"title":"Amati Victory Models HMS Pegasus Wood Scale Model Ship Kit","handle":"amati-victory-models-hms-pegasus-wood-scale-model-ship-kit","description":"\u003cp\u003eH.M.S. Pegasus was the sixth vessel built of the Swan Class of ship rigged sloop, of which twenty five of the class were built from 1766 to 1780. Pegasus, as with the entire Swan class was designed by Williams and her construction was ordered by the Admiralty on 1st August 1775 to be built at Sheerness Dockyard. The keel was laid in May 1775 and launched on 27th December 1776. The Swan class of 6th Rate sloops were unusually attractive for the class of vessel, with not only very sleek hull lines but also the unusual amount of decoration for the size of vessel. They were built just before the Admiralty issued orders that all vessels (especially lesser rates) were to have the minimal amount of decoration and carvings to save any unnecessary costs, due to the ever continuing war with France and other nations. There is little remaining about H.M.S. Pegasus' operational career, but from what little evidence there is, Pegasus was commissioned mainly for convoy escort duty and dispatch duty. Pegasus had a very short operation career, foundering off Newfoundland on 31st October 1777, her sister, H.M.S. Fly also foundered off Newfoundland some years later in 1802. The Swan Class measured 97' 7\" on the gun deck and displaced 300 tons. They carried 125 officers and men and initially carried 14 guns (later 16) and 16 swivel guns. The original plans of the Pegasus still exist, and it is with these plans the kit is based upon. The kit includes the following; Laser cut wooden parts throughout. Many photo etched brass detail sheets that include window frames, deadeye strop\/chainplate fittings, footrope stirrups and other fine mast and yard detail, gunport scuttles, hinges - the list is endless. Full size plans, which include very easy to follow rigging detail. The copper plates for below the waterline are of a completely new design. They are so accurate that there is a left and right side to the plates, and there are no unseemly over protruding nail heads, everything is scaled at 1:64th. Accompanying the plans is a fully illustrated building manual, taking you through every stage of the critical hull construction. There is also a full English instruction booklet, describing every detail of each stage of the main construction, along with histories.\u003c\/p\u003e\n\u003cp\u003e(Wooden pedestal and brass columns are not included.)\u003c\/p\u003e\n\u003cp\u003eScale 1:64, Total Length 31.5\", Height 23.6\"\u003c\/p\u003e\n\u003cp\u003eAdvanced Skill Level.\u003c\/p\u003e\n\u003cp\u003ePlease note: The manufacturer of this wood kit is based in Italy. Although complete plans and instructions are included, the limited English instructions provided require critical thinking and some modification as needed. This is not a build by numbers kit, and is not for everyone. Additional technique books, and or access to the advice of an experienced wood modeler or wood model club is recommended.\u003c\/p\u003e","published_at":"2017-06-04T21:22:07-07:00","created_at":"2017-06-04T21:22:07-07:00","vendor":"Amati","type":"Wood Model Ship Kit","tags":["Amati","Wood Model Ship Kit"],"price":64500,"price_min":64500,"price_max":64500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30804901381,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"13005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Amati Victory Models HMS Pegasus Wood Scale Model Ship Kit","public_title":null,"options":["Default Title"],"price":64500,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2070\/6535\/products\/amati-victory-models-hms-pegasus-wood-scale-model-ship-kit-3_gif.jpg?v=1554784931"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2070\/6535\/products\/amati-victory-models-hms-pegasus-wood-scale-model-ship-kit-3_gif.jpg?v=1554784931","options":["Title"],"media":[{"alt":null,"id":1461244526647,"position":1,"preview_image":{"aspect_ratio":0.622,"height":884,"width":550,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2070\/6535\/products\/amati-victory-models-hms-pegasus-wood-scale-model-ship-kit-3_gif.jpg?v=1569305051"},"aspect_ratio":0.622,"height":884,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/2070\/6535\/products\/amati-victory-models-hms-pegasus-wood-scale-model-ship-kit-3_gif.jpg?v=1569305051","width":550}],"content":"\u003cp\u003eH.M.S. Pegasus was the sixth vessel built of the Swan Class of ship rigged sloop, of which twenty five of the class were built from 1766 to 1780. Pegasus, as with the entire Swan class was designed by Williams and her construction was ordered by the Admiralty on 1st August 1775 to be built at Sheerness Dockyard. The keel was laid in May 1775 and launched on 27th December 1776. The Swan class of 6th Rate sloops were unusually attractive for the class of vessel, with not only very sleek hull lines but also the unusual amount of decoration for the size of vessel. They were built just before the Admiralty issued orders that all vessels (especially lesser rates) were to have the minimal amount of decoration and carvings to save any unnecessary costs, due to the ever continuing war with France and other nations. There is little remaining about H.M.S. Pegasus' operational career, but from what little evidence there is, Pegasus was commissioned mainly for convoy escort duty and dispatch duty. Pegasus had a very short operation career, foundering off Newfoundland on 31st October 1777, her sister, H.M.S. Fly also foundered off Newfoundland some years later in 1802. The Swan Class measured 97' 7\" on the gun deck and displaced 300 tons. They carried 125 officers and men and initially carried 14 guns (later 16) and 16 swivel guns. The original plans of the Pegasus still exist, and it is with these plans the kit is based upon. The kit includes the following; Laser cut wooden parts throughout. Many photo etched brass detail sheets that include window frames, deadeye strop\/chainplate fittings, footrope stirrups and other fine mast and yard detail, gunport scuttles, hinges - the list is endless. Full size plans, which include very easy to follow rigging detail. The copper plates for below the waterline are of a completely new design. They are so accurate that there is a left and right side to the plates, and there are no unseemly over protruding nail heads, everything is scaled at 1:64th. Accompanying the plans is a fully illustrated building manual, taking you through every stage of the critical hull construction. There is also a full English instruction booklet, describing every detail of each stage of the main construction, along with histories.\u003c\/p\u003e\n\u003cp\u003e(Wooden pedestal and brass columns are not included.)\u003c\/p\u003e\n\u003cp\u003eScale 1:64, Total Length 31.5\", Height 23.6\"\u003c\/p\u003e\n\u003cp\u003eAdvanced Skill Level.\u003c\/p\u003e\n\u003cp\u003ePlease note: The manufacturer of this wood kit is based in Italy. Although complete plans and instructions are included, the limited English instructions provided require critical thinking and some modification as needed. This is not a build by numbers kit, and is not for everyone. Additional technique books, and or access to the advice of an experienced wood modeler or wood model club is recommended.\u003c\/p\u003e"}

Amati Victory Models HMS Pegasus Wood Scale Model Ship Kit

Product Description

H.M.S. Pegasus was the sixth vessel built of the Swan Class of ship rigged sloop, of which twenty five of the class were built from 1766 to 1780. Pegasus, as with the entire Swan class was designed by Williams and her construction was ordered by the Admiralty on 1st August 1775 to be built at Sheerness Dockyard. The keel was laid in May 1775 and launched on 27th December 1776. The Swan class of 6th Rate sloops were unusually attractive for the class of vessel, with not only very sleek hull lines but also the unusual amount of decoration for the size of vessel. They were built just before the Admiralty issued orders that all vessels (especially lesser rates) were to have the minimal amount of decoration and carvings to save any unnecessary costs, due to the ever continuing war with France and other nations. There is little remaining about H.M.S. Pegasus' operational career, but from what little evidence there is, Pegasus was commissioned mainly for convoy escort duty and dispatch duty. Pegasus had a very short operation career, foundering off Newfoundland on 31st October 1777, her sister, H.M.S. Fly also foundered off Newfoundland some years later in 1802. The Swan Class measured 97' 7" on the gun deck and displaced 300 tons. They carried 125 officers and men and initially carried 14 guns (later 16) and 16 swivel guns. The original plans of the Pegasus still exist, and it is with these plans the kit is based upon. The kit includes the following; Laser cut wooden parts throughout. Many photo etched brass detail sheets that include window frames, deadeye strop/chainplate fittings, footrope stirrups and other fine mast and yard detail, gunport scuttles, hinges - the list is endless. Full size plans, which include very easy to follow rigging detail. The copper plates for below the waterline are of a completely new design. They are so accurate that there is a left and right side to the plates, and there are no unseemly over protruding nail heads, everything is scaled at 1:64th. Accompanying the plans is a fully illustrated building manual, taking you through every stage of the critical hull construction. There is also a full English instruction booklet, describing every detail of each stage of the main construction, along with histories.

(Wooden pedestal and brass columns are not included.)

Scale 1:64, Total Length 31.5", Height 23.6"

Advanced Skill Level.

Please note: The manufacturer of this wood kit is based in Italy. Although complete plans and instructions are included, the limited English instructions provided require critical thinking and some modification as needed. This is not a build by numbers kit, and is not for everyone. Additional technique books, and or access to the advice of an experienced wood modeler or wood model club is recommended.

Sku: 13005
Vendor: Amati
$645.00
Maximum quantity available reached.

SALES and RETURN POLICY:

 

SPECIAL NOTE ON GOODS DAMAGED IN SHIPMENT:

Be sure to inspect your shipment as soon as it arrives! If the product has been damaged during shipment, you must contact us IMMEDIATELY. A replacement product will be sent to you after you notify us.

Our Sales Policy may be stated very briefly, it is to do everything possible to assure Customer satisfaction.

We hope that you are satisfied and delighted with everything you purchase from us, however if this is not the case we will authorize returns for refund or exchange within 30 days following receipt of the item by you (except for personalized items). All returns must be new, unused and contain all original product packaging and accessories. Orders over $40 are subject to a 10% restocking fee if returned for credit. Orders over $1000 are subject to a 20% restocking fee. Shipments refused without authorization from us are subject to a 20% restocking fee. If a free shipping offer is used, the original shipping charge will be deducted from the return. Shipping and handling charges are not refundable. Returns must be made in original condition and in the item's original packaging, double boxed, and appropriately insured. Items that have been assembled, painted or altered in any way from the original condition cannot be accepted as a return. Additionally, if the product box has been damaged, or altered in any manner, we will also refuse to accept this as a valid return.

So that we can supervise proper handling of exchanges or credits, we must be aware of the return before it is sent back. Returned items must be received by us within 2 weeks of our Return Merchandise Authorization. For your protection, please use a "traceable" and insured shipping method like UPS ground.

IMPORTANT: Please E-mail us for a Return Merchandise Authorization (RMA #).
Please clearly mark your RMA # on the outside of your package. Packages received without the RMA # clearly marked may be refused or returned.


E-mail: sales@seagifts.com


Send to:
SEA-GIFTS
Sandcastle Publishing
Attn: Returns
7867 Dunbrook Road, Suite H
San Diego, CA. 92126

 

LIMITS OF RESPONSIBILITY - RC MODELS:

We accept no responsibility for damage and/or loss incurred during operation of a radio-controlled model. In most cases it is very difficult or impossible to determine whether the damage was actually due to radio equipment failure or to operator error. Replacement parts are available direct from the manufacturer. If the item you wish to return is inoperable, but has no apparent damage, it is considered defective. Used, defective merchandise should be returned directly to the manufacturer for warranty repair or replacement. If you need help in contacting the manufacturer, please e-mail us at sales@seagifts.com.